# Insert Bearings Spherical OD

Insert ball bearing with wide inner ring and two set screws. Spherical OD and grease feeding groove. UC Series Insert Bearings has a set screw locking and is held in position on the shaft by two set screws which are directly on the extended end of the inner ring. UC200 Series Insert Ball Bearings are self-aligning for standard load capacity.

The SER insert has a cylindrical OD and is equipped with a snap ring in the outside diameter. The SER insert bearing is used in applications where the housing is machined to accept snap rings or the snap ring is used for the retention of the bearing. It features a Neoprene Contact Seal designed to keep lubricant in while keeping contaminants out.Insert bearings are also available in free spinning design and a black oxide finish upon request. They are most commonly produced with a spherical OD to allow for misalignment, but are also available with a cylindrical OD.

- SEALMASTER AR-208TMC Insert Bearings Spherical OD
- 3.1250 in
- UKPX00+HS2000

- SEALMASTER AR-208TM Insert Bearings Spherical OD
- 3150 lbf
- Side Mount

- SEALMASTER AR-211TM Insert Bearings Spherical OD
- 15.31 lbs
- 1.9375 in

- SEALMASTER AR-209TM Insert Bearings Spherical OD
- Periodic lubrication
- Periodic lubrication

- SEALMASTER AR-207TMC Insert Bearings Spherical OD
- 75 mm
- 147 mm

- SEALMASTER AR-207TM Insert Bearings Spherical OD
- None
- 717905061806

- SEALMASTER AR-206TM Insert Bearings Spherical OD
- 3 in, 2-11/16 i

- SEALMASTER AR-206TMC Insert Bearings Spherical OD
- 2.55 in
- 16.5300 in

- SEALMASTER AR-204TMC Insert Bearings Spherical OD
- Light Duty
- Two-Bolt Base

- SEALMASTER AR-205TM Insert Bearings Spherical OD
- 7550 RPM
- Clearance/Non-C

- SEALMASTER AR-320 Insert Bearings Spherical OD
- 2.4409 in
- 711483

- SEALMASTER AR-316 Insert Bearings Spherical OD
- Techmet B
- 19.5 N/mm2;