Self Aligning Ball Bearings
Self-aligning Ball Bearings are particularly suitable for applications where misalignment occurs from errors in mounting or from shaft deflection. This bearing should only be used in light axial load applications due to the small axial capacity.
Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing , which can be caused, for example, by shaft deflection.In a self-aligning bearing, the inner ring has two raceways and the outer ring has a single spherical raceway with its center of curvature coincident with the bearing axis. This allows the axis of the inner ring, balls and cage to deflect around the bearing center to automatically correct misalignment caused by housing and shaft machining or installation error.

- NTN 1219 Self Aligning Ball Bearings
- IPTCI BEARINGS
- IPTCI

- SKF 2208 ETN9/C3 Self Aligning Ball Bearings
- Yes
- Straight

- SKF 2305 M/P6 Self Aligning Ball Bearings
- Cast Iron
- 40.87

- SKF 2210 E-2RS1KTN9/C3 Self Aligning Ball Bearings
- 5.75 Inch | 146.05 M
- 1 Inch

- SKF 2213 EKTN9/C3 Self Aligning Ball Bearings
- Steel
- 0 Inch | 0 Millimete

- 120 mm x 215 mm x 42 mm SKF 1224 M Self Aligning Ball Bearings
- 0 Inch | 0 Millimete
- Snap Over Cage | Thi

- 25 mm x 62 mm x 24 mm SKF 2305 M Self Aligning Ball Bearings
- REXNORD
- Bearings

- SKF 1316 K/C3 Self Aligning Ball Bearings
- 0
- Bearings